Jacek Puziewicz
Datos Biográficos
| ID | 167724 |
|---|---|
| NOMBRE | Jacek Puziewicz |
| NOMBRES | Jacek |
| APELLIDO | Puziewicz |
| FIRMA | PUZIEWICZ J |
| AFILIACIONES | University of Wrocław |
| ORCID | 0000-0003-0247-2944 |
| VERIFICADO | Sí |
| TOTAL DE OBRAS | 3 |
| TOTAL DE CITAS | 13 |
| TOTAL COMO AUTOR | 3 |
| TOTAL COMO EDITOR | 0 |
| PRIMER AÑO DE PUBLICACIÓN | 2015 |
| AÑO MÁS RECIENTE DE PUBLICACIÓN | 2020 |
| ÍNDICE H | 2 |
Same but different. Composition, production and use of bronze arrowheads from the Late Bronze Age deposit from Wrocław-Widawa in SW Poland
Beeswax remnants, phase and major element chemical composition of the bronze age mould from Gaj Oławski (SW Poland)
The recently found metal casting mould from Gaj Oławski (SW Poland) was designed for the production of socketed axes typical for later stages of the Bronze Age in Poland (ca. 1100-900 bc). This unique artefact is a half of a durable, two-piece wedge-shaped mould and measures 17.5 × 7.2 × 4.0 cm. The surface of the mould is covered copper oxides and carbonates, and the remnant of beeswax was found on its inner surface. The metal forming mould cons…
The Composition and Microstructural Variation of the Bronze Age Metal Ornaments from Lower Silesia (South-West Poland)
Metal ornaments from Únětice (Mierczyce, Tomice, Jordanów and Opatowice) and Urnfield culture (Szprotawa, Żarek and Wrocław Żerniki) sites in south-west Poland are made of bronze of varying composition, with the exception of the early Bronze Age Przecławice site, where the copper items are found in graves from stages III/IV. The combined XRF and electron microprobe study of 37 ornaments (mostly pins) shows that those excavated from Únětice cultur…
Beeswax remnants, phase and major element chemical composition of the bronze age mould from Gaj Oławski (SW Poland)
The recently found metal casting mould from Gaj Oławski (SW Poland) was designed for the production of socketed axes typical for later stages of the Bronze Age in Poland (ca. 1100-900 bc). This unique artefact is a half of a durable, two-piece wedge-shaped mould and measures 17.5 × 7.2 × 4.0 cm. The surface of the mould is covered copper oxides and carbonates, and the remnant of beeswax was found on its inner surface. The metal forming mould cons…
Same but different. Composition, production and use of bronze arrowheads from the Late Bronze Age deposit from Wrocław-Widawa in SW Poland
The Composition and Microstructural Variation of the Bronze Age Metal Ornaments from Lower Silesia (South-West Poland)
Metal ornaments from Únětice (Mierczyce, Tomice, Jordanów and Opatowice) and Urnfield culture (Szprotawa, Żarek and Wrocław Żerniki) sites in south-west Poland are made of bronze of varying composition, with the exception of the early Bronze Age Przecławice site, where the copper items are found in graves from stages III/IV. The combined XRF and electron microprobe study of 37 ornaments (mostly pins) shows that those excavated from Únětice cultur…
The Composition and Microstructural Variation of the Bronze Age Metal Ornaments from Lower Silesia (South-West Poland)
Metal ornaments from Únětice (Mierczyce, Tomice, Jordanów and Opatowice) and Urnfield culture (Szprotawa, Żarek and Wrocław Żerniki) sites in south-west Poland are made of bronze of varying composition, with the exception of the early Bronze Age Przecławice site, where the copper items are found in graves from stages III/IV. The combined XRF and electron microprobe study of 37 ornaments (mostly pins) shows that those excavated from Únětice cultur…
Beeswax remnants, phase and major element chemical composition of the bronze age mould from Gaj Oławski (SW Poland)
The recently found metal casting mould from Gaj Oławski (SW Poland) was designed for the production of socketed axes typical for later stages of the Bronze Age in Poland (ca. 1100-900 bc). This unique artefact is a half of a durable, two-piece wedge-shaped mould and measures 17.5 × 7.2 × 4.0 cm. The surface of the mould is covered copper oxides and carbonates, and the remnant of beeswax was found on its inner surface. The metal forming mould cons…
Same but different. Composition, production and use of bronze arrowheads from the Late Bronze Age deposit from Wrocław-Widawa in SW Poland
Archaeology (3 obras) · Bronze (3 obras) · Materials Science (3 obras) · Metallurgy (3 obras) · Archaeology and ancient environmental studies (2 obras) · Brass (2 obras) · Bronze Age (2 obras) · Casting (2 obras) · Copper (2 obras) · Cultural Heritage Materials Analysis (2 obras)