Impedance Measurement by a Resistive Bridge

The possibility of measuring an unknown impedance Z=R+jX by including it in one arm of a Wheatstone bridge, whose other arms are purely resistive, is examined. It is shown that by adjusting the variable resistance for minimum bridge output and measuring this output, one can calculate the magnitude |Z|, the resistive part R, and the magnitude of the reactive part |X| of the unknown impedance. Using a fixed auxiliary capacitor whose reactance is less than 2|X|, the sign of the reactive part can also be determined. The sensitivity of the bridge decreases as the ratio |X|/R increases; this can be remedied by adding a suitable series resistance to Z and/or by measuring the bridge output when its rate of variation with the adjustable resistance is maximum. An alternative method not involving voltage measurements, but requiring a suitable fixed, standard inductor or capacitor, has also been discussed. The theory involved in these measurements is pretty well within the reach of a sophomore student of electrical engineering and as such, this may constitute a simple, but interesting, laboratory exercise at that level

Bridge (graph theory) · Capacitor · Control theory (sociology) · Electrical engineering · Electrical impedance · Electronic engineering · Equivalent series resistance · Inductor · Mathematical analysis · Output impedance · Physics · Reactance · Resistive touchscreen · Resistor · Sensitivity (control systems) · Sign (mathematics) · Voltage · Wheatstone bridge · Computer Science · Electrical and Bioimpedance Tomography · Electrostatics and Colloid Interactions · Engineering · Mathematics · Non-Destructive Testing Techniques

• Impedance Magnitude Measurement from a Resistive Bridge

  Open Access•James L Massey, L V Auth et al.•IEEE Transactions on Education•1967

  Add to list